86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Yongjia Goole Valve Co., Ltd.

Products >> Pneumatic Ball Type Inlet Valve / Dome Valve (GYDF

Pneumatic Ball Type Inlet Valve / Dome Valve (GYDF

Build Your Online Product Catalogs?



Description
Product Name: Pneumatic Ball Type Inlet Valve / Dome Valve (GYDF
Supply Ability: 10000
Related proudcts valve, ball valve, ceramic valve,
Specifications 15
Price Term: FOB,CIF,CFR
Port of loading: Ningbo
Minimum Order 10
Unit Price: $2

Pneumatic Ball Type Inlet Valve / Dome Valve (GYDF-B)

Installation, Use & Maintenance:
1. Before Installation, it's necessary to clean the valve and remove possible defects caused in the transportation process.
2.Check carefully whether marks and the nameplate on the valve meet operating requirements.
3. This valve can be insstalled on pipelines at any angle.
4. This valve shall be fully open or fully closed in running and not be used as a throttle valve, or else its sealing surfaces will be washed and get worn faster.
5. For Long term storage, it shall be stored in a dry and ventilated room whth periodic check to avoid rust.
6. Knocking shall be avoided in the transportation process.

Structural Features:
1.Its sealing surface adopt silicone rubber inflatable seal to guarantee zero leakage.
2. The valve adopts double electromagnetic control, and dedicated slenoid valves are used for control of both actions of the cylinder and exhaust of the gasket ring to ensure zero abrasion between the sealing surface and the spherical surface, thus improving its service life.
3. A rolling bearing is mounted between the valve body and the lock ring, overcoming the friction produced in rotations of the ball, which can thus rotate flexibly.

Working Principle
When tthe valve is closed, the dedicated solenoid valve for the pneumatic actuator will act; the pneumatic actuator will drive the ball to rotate to the closing position through the valve stem, triggering the changeover push rod, and then the gasket ring will be flated to compress the ball surface to produce a seal.
When the valve is open, the dedicated solenoid valve for the gasket ring will act first, the gasket ring wil exhaust rapidly and disengate itself from the ball surface to a free state, then the dedicated solenoid valve for the pneumatic actuator will act, and the cylinder will drive the ball to rotate to the open position.

Contact Us
Company: Yongjia Goole Valve Co., Ltd.
Contact: Ms. Judith Pan
Address: He-Yi Industiral Zone, Oubei Town, Yongjia, Wenzhou, Zhejiang, China
Postcode:
Tel: 86-577-57789961
Fax: 86-577-57789962
E-mail:         


Copyright© Yongjia Goole Valve Co., Ltd. All Rights Reserved.
Tel : 86-577-57789961 Fax : 86-577-57789962
Powered by 86exporter.com